UFO Lighting | Lighting that's out of this world

LED Cabinet Lighting Kits

  1. Home
  2. LED Cabinet Lighting Kits
  3. LED Kit With LD2 Fitting

LED Lighting Kit with LD2 Downlight

ld2 kit overview

Our LD2 LED lighting kits offer a quick and easy solution for lighting cabinets and display cases of all shapes and sizes.

This kit comes with a choice of color temperatures, high color rendition and narrow, medium and wide beam options to suit varying requirements.
Also included is a driver unit which allows you to control the overall dimming level of the lighting via a potentiometer which can be mounted in a standard 1 gang pattress box, a splitter box and 2.5 meters of cable for each fitting.
Whether you want to gently wash the interior of a cabinet or highlight specific areas or niches, it is achievable with the LD2.

Easy Installation

The LD2 fitting is easily installed in a variety of mounting surfaces and is held in place with two retaining springs which are not visible once the fitting is installed.
The fitting requires a 35mm (1.38") cutout in the mounting surface.
Once the holes are cut, you simply push the fittings into place, and the robust securing springs will snap into place. You then just connect their power cables to the splitter box and switch on.

UFO LD2 LED Downlight

As with all of the downlights in this range, the LD2 uses a Oslon LED to provide decorative lighting in indoor environments including residential hallways, kitchens and living rooms as well as several commercial environments.
It features a bezel spanning 48mm in diameter and a recess depth of 35.50mm, making it slightly larger in stature than the LD1. Unlike its counterpart, this aluminum fitting comes with a flush bezel for those requiring an unobtrusive transition between downlight and ceiling.
The LD2 is available with a choice of color temperatures, beam angle options and dimming functionality to provide greater control over your lighting.
It comes with a built in spring mounting system for easy and secure installation in ceilings and other surfaces, and as with all of our LED fittings is available in a range of finishes and colours.
ld2 image and cad

Note that dimensions are shown in mm

GENERAL INFORMATION
Color Temperature & CRI Options3000K @ 98CRI or 4000K @ 97CRI (typical)
Typical Luminous Flux
(based on 19° lens)		3000K: 65lm/W | 4000K: 72lm/W
Optics OptionsNarrow: 13.5° / Medium: 19° / Wide: 28°
Power Consumption1W per fitting
Voltage3.2V nominal
MaterialAluminum
Available Bezel FinishesBlack or silver
Operating EnvironmentIndoor
Securing MethodSecured through surface with spring clips. 35mm (1.38") cut out required.

Ordering Codes

No. of Fittings Bezel Color Ordering Code
4 x LD2 Black CLED-LD2-4B+[color temperature]+[lens][1]
4 x LD2 Silver CLED-LD2-4S+[color temperature]+[lens][1]
6 x LD2 Black CLED-LD2-6B+[color temperature]+[lens][1]
6 x LD2 Silver CLED-LD2-6S+[color temperature]+[lens][1]
8 x LD2 Black CLED-LD2-8B+[color temperature]+[lens][1]
8 x LD2 Silver CLED-LD2-8S+[color temperature]+[lens][1]
10 x LD2 Black CLED-LD2-10B+[color temperature]+[lens][1]
10 x LD2 Silver CLED-LD2-10S+[color temperature]+[lens][1]
12 x LD2 Black CLED-LD2-12B+[color temperature]+[lens][1]
12 x LD2 Silver CLED-LD2-12S+[color temperature]+[lens][1]
[1] Add color temperature and lens type to end of code (3K - 3000K / 4K - 4000K) and (WD - wide / ME - medium / NA - narrow). E.G. CLED-LD2-4B-3K-WD