UFO UK Website 
UFO Licht Website RGBW LED Illuminators
UFO Nova Aqua Illuminator
A very powerful RGBW fiber optic illuminator utilising LED technology. Features full IP67 ingress protection and powered by an external 24V DC power supply unit.
Utilising industry standard DMX to control the unit's color change effects, plus the option of adding a twinkle wheel and an RF remote control, this is the ultimate illuminator for powering decorative fiber optic effect lighting.
A 50,000 hour lamp life and cool quiet running ensure that maintenance costs are reduced to almost nil.
Fitted with a standard 30mm fiber port connector, this illuminator is suitable for both new installations and retro-fitting to existing fiber optic installations.
Please note that although this illuminator is fully IP67 rated and can be used in wet/outdoor areas, it is not suitable for submersion in water and it should not be buried underground.
Sea Water & Saline
Please be aware that UFO will not specify, supply or install this illuminator for use in any area where corrosion or damage from saline may occur. This includes near the sea, on ships or in any other areas where the illuminator would be in an unprotected area. Damage caused by salt water due to improper, unprotected siting of the illuminator will void any and all UFO warranties on the product. UFO strongly recommend that the illuminator is not installed in any location where such damage may occur.
Note that dimensions are shown in mm
Fiberstars EFO Harness Compatibility
Fiberstars compatibility with UFO quality!
If you are one of the many people who have, in the past, purchased a fiber optic harness for use with a Fiberstars EFO-1+1 or EFO-AG illuminator, you may know that it is now virtually impossible to purchase a compatible, replacement illuminator.
This UFO illuminator is one of a range which is compatible out-of-box with these harnesses.
Optionally, you can purchase a light amplifier from us which will increase the light supplied to this type of harness. Simply insert the light amplifier into the port. Secure with the supplied screw and then attach your Fiberstars harness as normal.
You can now benefit from the great light output and features of a UFO illuminator without having the cost of replacing your fiber harness.
The EFO Adaptor is designed to take a standard Fiberstars harness which has a 1” 7/8 ACME 10 TRAPEZOIDAL thread, and features an internal acrylic light amplifier which carries the light directly to the fiber ends.
EFO Large Core Fiber / Pre Assembled Harnesses
| Fiberstars Part No. | Description | Each Fiber OD | Each Fiber ID |
|---|---|---|---|
| EFO-HF5-9/8-10 or XX | 5 way | 9mm (0.354") | 8mm (0.266") |
| EFO-HF4-12/10-10 or XX | 4 way | 12mm (0.472") | 10mm (0.394") |
| EFO-HF3-14/12-10 or XX | 3 way | 14mm (0.551") | 12mm (0.472") |
| EFO-HF1-22/19-10 or XX | 1 way | 22mm (0.866") | 19mm (0.748") |
EFO Large Core Fiber / with compatible common end
| Fiberstars Part No. | Description | Each Fiber OD | Each Fiber ID |
|---|---|---|---|
| EFO-9/8mm | 1 way | 9mm (0.354") | 8mm (0.266") |
| EFO-12/10mm | 1 way | 12mm (0.472") | 10mm (0.394") |
| EFO-14/12mm | 1 way | 14mm (0.551") | 12mm (0.472") |
| EFO-17/15mm | 1 way | 22mm (0.866") | 19mm (0.748") |
| EFO-22/19mm | 1 way | 22mm (0.866") | 19mm (0.748") |
EFO Side Emitting Fiber / with compatible common end
| Fiberstars Part No. | Description | Each Fiber OD | Each Fiber ID |
|---|---|---|---|
| EFO-BC1300 | 1 way | 13mm (0.508") | 12mm (0.472") |
| EFO-BC1400-E | 1 way | 14mm (0.551") | 12mm (0.472") |
| EFO-TT1300 | 1 way | 13mm (0.508") | 12mm (0.472") |
| EFO-TT1400-E | 1 way | 14mm (0.551") | 12mm (0.472") |
In addition to the items listed above, the adaptor is compatible with any Fiberstars harness fitted with a common end which has a 1” 7/8 ACME 10 TRAPEZOIDAL thread.
| GENERAL INFORMATION | |
|---|---|
| Port Connector Size | 30mm diameter |
| Fiber Type | Glass / PMMA |
| Material / Finish | Hard anodised aluminum |
| Dimensions (L x W x H) | 222mm x 240mm x 163mm 8.74" x 9.45" x 6.4" |
| Weight | 4.44kg (9.78lb) |
| Operating Environment | Outdoor use - IP67 It is imperative that a gap of 200mm (8") is left around the unit. This is to allow air to circulate and prevent overheating. The location must have free ventilation and must not have an ambient temperature higher than that specified for the unit. |
| Min. Ambient Temperature | -10°C (14°F) |
| Max. Ambient Temperature | 45° |
| LIGHTING & CONTROL INFORMATION | |
|---|---|
| Control Functionality | DMX, manual push-button and remote control options |
| DMX Addressing | User addressable to 512 |
| DMX Channels | 6 channels |
| Color Change Functionality | Controlled by DMX, manual push-button or remote control |
| Dimming Functionality | Controlled by DMX or remote control |
| Effects Wheels Options & Functionality | Twinkle wheel controlled by DMX or manual push-button operation. Available with or without sensor |
| LED ARRAY DATA | |
|---|---|
| LED Array Type | Custom RGBW array |
| LED Array Power | 46W |
| LED Array Model | Luxeon 36 LED Array |
| LED Array Life (L70, B10) | 50,000 hours @ 25°C |
| White Color Temperature Options | 6500K |
| ELECTRICAL CHARACTERISTICS | |
|---|---|
| Supply Voltage | 90-264Vac |
| Mains Running Current | 0.2A @240Vac |
| Mains Voltage VA Rating | 50VA |
| External PSU Type | Meanwell, 24VDC, IP67, Type HL Driver |
| Motor Type | Rotalink 25C13/YS0LPSL3E 12V 60:1 |
| Fan Type | ebm-papst, 80mm, IP68, 32dBA |
| RF REMOTE CHARACTERISTICS | |
|---|---|
| RF Remote Frequency | 2.4GHz |
| RF Remote Range | 30m (32.8yd), depending on environment |
| RF Remote Power | 2 x AAA batteries (supplied) |
| CONFIGURATIONS | Click the option buttons below to create the fitting model number |
|---|
MODEL TYPE
COLOR TEMP
EFFECT
REMOTE CONTROL
SENSOR
Model Number:
For the configuration of a twinkle wheel with sensor, the wheel is supplied with a cut out segment. The wheel in motion will give an uninterrupted twinkle by rotating backwards and forwards either side of the segment. When stop is selected the wheel will come to rest at the segment giving unobstructed white light output.